Máy nén khí piston Fenpai 2 cấp
TWO STAGE COMPRESSOR
| Model
|
Capacity
(m3/min) |
Pressure
(Mpa) |
Power
(Kw) |
Speed
(r.m.p) |
Dimensions
LxHxW (mm) |
Weight
(Kg) |
| FS-1.3/30 | 1.3 | 3.0 | 15 | 730 | 1680x720x1040 | 480 |
| FS-1.6/30 | 1.6 | 3.0 | 18.5 | 840 | 1780x820x1240 | 650 |
| FS-2.0/30 | 2.0 | 3.0 | 22 | 730 | 2200x960x1440 | 680 |
| FS-2.5/30 | 2.5 | 3.0 | 25 | 860 | 2200x980x1360 | 980 |
| Model
|
Capacity
(m3/min) |
Pressure
(Mpa) |
Power
(Kw) |
Speed
(r.m.p) |
Dimensions
LxHxW (mm) |
Weight
(Kg) |
| FH-0.7/30 | 0.7 | 3.0 | 7.5 | 750 | 1970x800x1220 | 480 |
| FH-1.2/30 | 1 | 3.0 | 11 | 620 | 1600x860x1520 | 550 |
| FH-1.2/30-T | 1.2 | 3.0 | 15 | 630 | 2000x680x1280 | 580 |
| FH-1.6/30 | 1.6 | 3.0 | 18.5 | 780 | 1900x930x1230 | 670 |
| FH-2.0/30 | 2 | 3.0 | 22 | 735 | 1900x930x1230 | 700 |
| FH-2.5/30 | 2.5 | 3.0 | 25 | 780 | 1900x930x1230 | 730 |
| FD-0.6/10 | 0.6 | 1.0 | 7.5 | 610 | 1560x780x1400 | 410 |
| FD-1.0/10 | 1.0 | 1.0 | 7.5 | 750 | 1560x780x1400 | 420 |
| FD-1.6/10-V | 1.6 | 1.0 | 11 | 1050 | 1650x800x1420 | 460 |
| FD-1.6/12-W | 1.6 | 1.2 | 15 | 950 | 1750x840x1540 | 620 |
| FD-2.0/12 | 2.0 | 1.2 | 15 | 740 | 1750x840x1540 | 620 |
| FD-2.2/12 | 2.2 | 1.2 | 15 | 950 | 1750x840x1640 | 670 |
| FD-3.0/10 | 3.0 | 1.0 | 22 | 790 | 1800x900x1745 | 700 |
PNEUMATIC CONTROL DEVICE
Elaborate & sensitive design with guaranteed safety.
INTAKE AND EXHAUST VALVES
Stainless steel valve made of Sweden Sandvik 7C27M02 steel, critically lathe & grinder machined, stress eliminated, to assure excellent strength and anti-impact under high temperature.
AIR FILTER
Make of imported materials, with perfect filtering and muffling result, and long service life.
CYLINDER COVER
Streamlined air tunnel with excellent cooling effect.
CYLINDER
Cylinder body machined and grinded by precision CNC to assure durability.
PISTON RING
Adopts LIKEN Ring (Japan) made of fine material, preventive to scrape on cylinder body, low oil consumption, avoidance to carbon gathering.
CONNECTING ROD
Tie rods machined and hole by special machine tool with guaranteed paralleled, leads to more smooth and stale running of air compressor, and lower consumption of lubricating oil.
CRANK SHAFT
Parts of wear abrasion adopt wearing-resistant steel with their surface hardened, to assure best wearability.
CRANK CASE
All of the orifices and surfaces done in once by one CNC machine to assure parallelism and verticality.
BELT PULLEY
Dynamic balanced belt wheel integrated with fan by iron casting leads to perfect flywheel result, low noise, stable running.
BEARING
Bearing of high performance and long service life made by Sino-US joint-venture.
COOLING COPPER TUBE
Cooling Copper Tube with technical design on high cooling effect, the tube is specially used for reducing temperature.
COUNTER WEIGHT
Adopt new balance technology, low noise, low vibration.